Fiberlock IAQ 6000/6100
Mold Resistant Coatings
• Extremely durable coating developed
to withstand moist, humid conditions
• Easy to apply, 100% acrylic coating
• Excellent mold resistance
• EPA-registered, broad-spectrum
fungicide to prevent the growth of
mold on the surface of the cured film
• Smooth finish minimizes dirt buildup
• Recommended for use on plaster,
wallboard, Sheetrock, concrete,
masonry block, wood, primed
metal and galvanized metal
IAQ 6000HD High Viscosity,
Mold-Resistant Sealant
• White, tintable, high-build mold-resistant
coating for professional use that contains
a fungistatic agent to resist mold growth
on the dry coating surface
• Durable, flexible, and permeable 100%
acrylic water-based coating
• Tested by independent and certified
laboratories to prove resistance to mold
growth on the surface of the coating
• ASTM G-21 and ASTM D-3273 mold
resistance tested
• Designed for use on non-porous and
semi-porous building materials including
gypsum wallboard, oriented-strand board
(OSB), wood framing timbers, plywood,
and many other structural surfaces
$295.00 Item #8362 5 gallons $295.00 $295.00 Item #8360 5 gallons White Item #8361 5 gallons ClearIAQ 8000/8500 High Build
HVAC Insulation Coating
• High performance coating for duct work
• Designed to bridge and reinforce duct
liner or duct board insulation materials
• Can also be used to seal unlined duct
work prior to component removal
• Dries to form a durable, exible,
moisture-resistant protective coating
with a semi-gloss that minimizes
inanimate particulate buildup
• Maximum bridging ability on insulation
materials and reduces sagging and
dripping when applied to the vertical
and top surfaces of unlined duct
• Contains a fungistatic agent to resist
mold growth on the dry coating surface
• ASTM standard C-411
• ASTM E-84 Class A rating
• Meets requirements of NFPA 90A/90B standard
• Tested in accordance with the procedures out-
lined in ASTM G 21 and received a No. 0 rating
(No fungal growth, 0% growth on the specimens)
$218.00 Item #8380 5 gallons White Item #83855 5 gallons BlackFiberlock AfterShock
Fungicidal Coating
• The first EPA-registered
fungicidal coating
• Designed to kill residual
mold and mildew remain-
ing after pre-cleaning
contaminated surfaces
• Inhibits future growth and
spread of mold and mildew
• Extremely durable
• Easy to apply
• 100% acrylic sealant
$240.00 $63.00 Item #83901 1 gallon Item #8390 5 gallonsFiberlock IAQ 9000 Mold-
Resistant Waterproofer
• Specially formulated to stop water from
penetrating through a variety of interior
and exterior surfaces including above
or below grade masonry walls, cinder
and concrete blocks, stucco, brick,
retaining walls, basements,
and foundations
• Stops 10psi of water pressure (greater
than a wall of water 22 feet high)
• Fast-drying formula
• Applied easily with a brush and/or roller
• Cleans up easily with soap and water
• Contains an EPA-registered fungicide
to help prevent mold from growing on
the surface of the cured film
$212.00 Item #8395 5 gallonsFiberlock Recon Citrus
Solvent Cleaner
Item#3022R 1 gallon $69.00 $218.00• Advanced degreaser and
deodorizer that utilizes a
citrus based solvent
• This muli-purpose
concentrate instantly
emulsifies grease, oils
and fats without the use
of harsh solvents or
ozone depleters
• Ready-to-use formula
with an extremely
powerful cleaning ability
Coatings & Cleaners
YOUR DEPENDABLE SUPPLIER
of Safety Products and Much, Much More!
80