• Permanent insulation encasement
and repair system
• Quickly covers pipes, breeching,
valves, duct work and other fittings
• Applies quickly and easily
• Once dry, it permanently retains
its strength, shape and form
• Lowest cost encasement
material available
• Using Wet Wrap ‘N’ Seal followed by
applying a bridging encapsulant satisfies
procedures specified by the National Institute
of Building Sciences in 1986 for the proper
repair of insulation and lagging
• For a bridging encapsulant, use
SerpiMastic, Lag-Kote or Lag-Kote II
YOUR DEPENDABLE SUPPLIER
of Safety Products and Much, Much More!
76
• Can be applied to previously painted surfaces
• Can be used over the hard, non-absorptive
types of asbestos insulation that will not
"accept" a penetrating type encapsulate
• Can be used with glass cloth as a lagging
adhesive and coating to encapsulate
asbestos containing pipe covering
and boiler lagging insulation
• Extensively tested by Battelle Columbus
Laboratories and is on the list of products
deemed acceptable by the U.S. EPA
Fiberlock Technologies
Lag Kloth Wet Wrap
• Lag-Kloth is a woven fabric
impregnated with an inor-
ganic adhesive, designed to
repair and/or cover existing
asbestos insulation on
pipes, boilers and breeching
• Areas that are repaired or
re-covered with Lag-Kloth
can be successfully top
coated with Lag-Kote® or
Lag-Kote II for complete
encapsulation
• The self-contained adhesive
in Lag-Kloth is water-
activated and
nonflammable and is
heat resistant up to 600°F
• Single component, penetrating encapsulant
for abating asbestos fiber fallout,
and retention method
• Penetrates deeply into the asbestos
containing materials, and then dries to form a
firm, lightweight, damage-resistant surface
• Dries untinted colorless
• Extensively tested by Battelle Columbus
Laboratories and is on the list of products
deemed acceptable by the U.S. EPA
• Meets NFPA 90A and 90B 25/50 requirements
$635.00 Item #6425 5’ x 15’ Item #6426 5’ x 150’ Item #6427 4” x 150’ $139.00#6426
#6425
Foster® Protektor® Sealant/
Lockdown Encapsulant, Clear
Item #3222F 5 gallons $58.00Fiberlock Technologies
Lag-Kote
• Lag-Kote is a 100% acrylic, high-solids
encasement/encapsulation coating,
specifically formulated for application over
a variety of asbestos containing materials
• Designed to encase spray-on fireproof-
ing, asbestos-containing plasters and
paints, transite, and asbestos-containing
thermal insulation, Lag-Kote's viscous
formulation minimizes dripping, cleanup
and product waste
• Lag-Kote provides a smooth, washable,
aesthetically superior finish that will
provide years of lasting protection
• Lag-Kote has excellent resistance
to alkalis and can be applied directly
over galvanized metal, wood,
masonry or other sound surfaces
• Lag-Kote is water-based
Item #6424 5 gallons $210.00Foster® Bridging
Encapsulant, White
Item #3232F 5 gallons $208.75Foster® Bridging Mastic
Encapsulant Lockdown
• Forms a tough, light colored, washable,
abrasion resistant, elastomeric coating that
economically abates the release of asbestos fi-
bers from both conventional and spray applied
asbestos-containing materials (ACM)
• Used with glass cloth, is ideal for use over inte-
rior pipe covering and boiler lagging insulations
• Applied at 400 square feet per gallon, and
cures to form a visible film effectively abating
the release of remaining fibers
Item #3280F 5 gallons $113.40Fiberlock Technologies
Lag-Kote II
• Thick bridging encapsulant/sealant
specifically formulated for applica-
tion over interior friable asbestos
containing material (ACM)
• It is ideally suited to encapsulate
interior pipe lagging, boiler jackets,
breeching and other components
of heating and ventilation systems
• Its thick body minimizes dripping,
cleanup and product waste while
providing a smooth, washable,
aesthetically superior finish that will
provide years of protection
Item #6420 5 gallons $165.00 Item #WC69 6” x 9’ RollWet Wrap
• UV inhibitors make Lag-Kote
suitable for encasement of
exterior transite siding and as-
bestos fortified paint systems
$214.00 $7.25Encapsulant