Background Image
Previous Page  48 / 92 Next Page
Show Menu
Previous Page 48 / 92 Next Page
Page Background

Fit Test Banana Oil Ampoules

• Provides a fast, safe

and easy method to

perform qualitative

respirator fit check

• When activated, the

ampules give off a

non-irritating odor

of banana oil

(Iso Amyl Acetate)

ABO10 Item #

Alcohol Free

Respirator Wipes

3001AF Item #

Alcohol Free

Respirator Wipes

• Alcohol free

• Used to clean 3M elastomeric

facepiece respirators

• 8” x 10” towelettes

• Will not damage the facepiece materials

• Individually packaged

• 100 per box

• 5 boxes per case

5043M Item #




SCBA Mask Bag

Item # 13081

Full Mask

Storage Bag

• Drawstring closure with added locking device

• Clear plastic window pocket which allows

for personal identification

• Cotton outer fabric

• Fleece inside to protect mask

• Easy to store

• Special hook to allow bag to hang

when being stored

• Size: 16” x 14”, will fit all full

facemask respirators


Respirator Storage Bag

Item #RUBF Full Face Bag Size: 11.5” x 7.5” x 5.5” Item #RUBH Half Face Bag Size: 8.5” x 7.5” x 3.5”

• Bag for respirator

and equipment

• Made of durable

polyester on PVC

• Water resistant

• Heavy duty belt

loops for fast


• Velcro® closure

Smoke Fit Test Kit

DiVal’s very own Irritant Smoke

Tube Kits are quick, simple, and

economical to use for respirator fit

testing and airflow indication. The

kits contain everything needed to

perform multiple fit tests without

the cost of extra equipment.

ASK1 Item #

Replacement Smoke Tubes

• For use with

#ASK1 smoke

fit test kit

• Six tubes

per box

501 Item #

Kit Contents:

• (1) Smoke tube

• (1) Tube protector

• (1) Tube tip breaker pin

• (1) Aspirator bulb pump

• (1) Carrying case

$12.60 /BX $42.60 /BX $46.00 /EA $33.60 /BX $9.60 /BX $25.75 /EA $17.25 /EA $9.50 /EA $7.50 /EA

• Each aspiration bulb pump

and Gastec irritant smoke

tube is pre-calibrated and

ready for immediate use

• No special sensitivity

test chemical mixtures to

prepare in advance

• 1000D nylon main material

• Drawstring closure with hi-vis loop

opening for one-handed operation

• Reflective stripe for better visibility

• Spring loaded steel clasp

attaches to gear or belt

• ID window for user identification

• Storm drain ventilation on the

bottom of bag

• Brushed polyester

fleece lining

• 8.5” x 8.5” x 12”



• Irritant smoke is the

only OSHA-accepted

qualitative fit testing

method that does not

rely on the test subjects

subjective response

• If banana odor is

detected by the

wearer, the respira-

tor must be adjusted

or replaced

• 10 ampules

per box


of Safety Products and Much, Much More!


Respirator Cleaning, Storage and Fit Testing

• For use on respirator facepieces

where the manufacturer recommends

using a non-alcoholic cleaning wipe

• 100 towelettes per box

• Active ingredient is

benzalkonium chloride

• Will not harm even the most

sensitive rubber facepieces